LEVEL DATA LOGGER PD-3/4/5

  • Measuring up to four different parameters
  • Compact, waterthight housing, flood-proof and suitable for long-term use in the field
  • Compensation of barometric fluctuations and temperature fluctuations as a standard
  • Data retrieval locally or by means of data transmission (only PD-5)
  • Convenient back-check measuring by use of electric contact gauge without the need to dismantle the equipment
  • Energy supply for up to 10 years of operating time or 2,000,000 measurements
  • Universal range of application: level pipes, wells, open water or measurement at weir
  • Variable cabel lenghts are possible
  • System at a good value for money level
Dodaj u ponudu
SKU: 697 Kategorije: ,
 

Opis

DATA LOGGER WITH PROBES FOR GROUNDWATER MONITORING AND WATER LEVEL MEASUREMENT

Level Data Loggers are the ideal measurement devices for reliable measuring of water level and temperature, conductivity or pH-value or further parameters in groundwater, at springs or lakes. Appropriately to the measuring requirements diverse loggers and probes can be supplied.

FIELDS OF APPLICATION

SOMMER level data loggers are considered to be the ideal measuring instruments in order to reliably record water level in level pipes and wells. Moreover, the PD-product family is a useful tool for hydrography, the groundwater monitoring as well as for water resources management, applicable for measurements in open water, water reservoirs or tanks where it builds a dependable tool for the water management. Simple and cost efficiently parameters like water level, temperature, conductivity, etc. are recorded.

Specifications

PD-3 (MAX. 2 PARAMETERS)

Measuring reliably water level and temperature. The PD-3 is a very dependable instrument to measure water level and temperature for example at groundwater observation sites. At an excellent value for money ratio this level data logger works perfectly even at rough outside conditions such as high/low temperature or humidity. The pressure probe and the logger create a compact, fixed unit.

TECHNICAL DETAILS PD-3

  • Parameters water level, adjustable (up to 300 m hydrostatic head); temperature, 0 … +50 °C
  • Accuracy < 0.05 % (water level), < 0.1 °C (temperature)
  • Memory more than 338,500 records
  • Interface output to laptop: RS 232-serial or USB
  • Power supply integrated lithium battery for 2.000.000 measurements or 10 years of operation, at a measuring interval of 3 minutes
  • Measuring interval adjustable, 1 minute to 99 days (optionally: from 1 second)
  • Dimensions Ø 29.5 mm x 190 mm (data logger) Ø 34 mm x 95 mm (reading unit)
  • Assembly in level pipe 1 ¼” to 6″; from 3″ with fall protection rings (optionally)
  • Material housing in stainless steel (V4a)
  • Protection IP 68, permanently flood-proof up to 3 m hydrostatic head

PD-4 (MAX. 4 PARAMETERS)

Four parameters in a compact system – The PD-4 provides you a high level of flexibility. It is possible to measure up to four different parameters at the same time by attaching two probes. Varied use, large data memory and up to ten years of operation time are amongst the many advantages of this equipement.

TECHNICAL DETAILS PD-4

  • Parameters water level, temperature, conductivity, pH-value
  • Memory 4 MB for up to 520.000 measuring values
  • Interface output to laptop: RS 232-serial or USB; input from measuring probes: 2 x RS 485 Modbus-connections or 1 x analogue 4 to 20 mA
  • Power supply integrated lithium battery for up to 2,000,000 measurements or 10 years of operation
  • Measuring interval adjustable, 1 second to 99 days
  • Dimensions Ø 34 mm x 235 mm
  • Assembly in level pipe 1 ¼”to 6″; from 3″ with fall protection rings (optionally)
  • Material housing in high-grade stainless steel 1.4301
  • Protection IP 68, permanently flood-proof up to 3 m hydrostatic head

PD-5 (MAX. 4 PARAMETERS AND WITH DATA TRANSMISSION)

High end logger with data transmission – Hydrology at its highest level: With the opportunity to measure up to four parameters at the same time and built-in data transmission the PD-5 stands above all for its customer value. Using GSM or GPRS technology it delivers the collected data via internet directly to the PC or a webserver of the water management system.

TECHNICAL DETAILS PD-5

  • Parameters water level, temperature, conductivity, pH-value, turbidity (optional)
  • Data transmission GSM / GPRS
  • Frequency 900 / 1800 MHz (standard); 850 / 1900 MHz (alternative)
  • Memory 2 MB for up to 190.000 measuring values
  • Interface output to laptop: RS 232-serial or USB; input from measuring probes: 2 x RS 485 Modbus-connections or 1 x analogue 4 to 20 mA
  • Energy supply standard: 3 pcs. alkali-manganese battery size C – for approx. 2 years; alternative: 3 pcs. lithium battery size C – approx. 6 years (daily data transmission)
  • Measuring interval adjustable, 1 second to 99 days
  • Dimensions Ø 49 mm x 380 mm – including battery compartment and antenna
  • Assembly in level pipe 2″ to 6″ pipes; from 3″ with fall protection rings (optional)
  • Material housing in high-grade stainless steel 1.4301 / high-quality synthetic (polyoxymethylen)-closure prohibits network shielding
  • Protection IP 68, peramanently flood-proof up to 1.5 m hydrostatic head

TECHNICAL DETAILS FOR MEASURING PROBES

WATER PRESSURE PROBE (COMPATIBLE WITH PD-4, PD-5)

  • Parameter water level: adjustable; up to 300 m hydrostatic head; temperature: 0 to +50 °C (expandable up to +70 °C)
  • Accuracy < 0.05 % of measuring range (water level); < 0.1 °C (temperature)
  • Dimensions Ø 22 mm x 120 mm
  • Material high-grade stainless steel 1.4571

MULTIPARAMETER PROBE (COMPATIBLE WITH PD-4, PD-5)

  • Parameters water level: adjustable; up to 200 m hydrostatic head; temperature 0 to +50 °C (expandable up to +70 °C); conductivity: 0 to 200 mS / cm
  • Accuracy < 0.05 % of measuring range (water level); < 0.1 °C (temperature); < 0,5 % of measuring range; min. 0.002 mS / cm (conductivity)
  • Abmaße Ø 30 mm x 175 mm
  • Material high-grade stainless steel 1.4571 / POM

CONDUCTIVITY PROBE (COMPATIBLE WITH PD-4, PD-5)

  • same as multiparameter probe, except measuring water level

PH-VALUE PROBE (COMPATIBLE WITH PD-4, PD-5)

  • Parameters pH-Value 2 to 14 pH; temperature 0 to +50 °C
  • Accuracy < 0.02 pH; < 0.1 °C (temperature)
  • Overlap max. 100 m hydrostatic head (= 10 bar)
  • Dimensions Ø 29.5 mm x 250 mm
  • Material high-grade stainless steel 1.4571

GENERAL TECHNICAL INFORMATION

  • Data format readout of data in ASCII or Excel-format
  • Change of battery PD-3 & PD-4: to be done only by supplier / PD-5: possible to be done by user
  • Cable of probes special cable (Ø 6 mm): UV-resistant polyurethan-manteling with kevlar core and inside air hose for compensation of barometric fluctuatuions, no cartridges necessary; selectable cable lenght up to max. 300 m
  • Assembly device conveniently fits into level pipes with the possibility to do back-check measurements with an electric contact gauge without the need to disassemble the probes.
  • Accessories USB-transmission cable 5 m, user software, caps for level pipes with synthetic insert (sizes from 1 ¼” to 6″; from 3″ with fall protection rings – optional)
  • Temperature temperature-compensation 0 … +50 °C
  • Optional equipment probe to measure turbidity (applicable only for PD-5)

PDF katalog

ProductLeaflet_PD-3-4-5_EN

Povezani proizvodi